juliusmall Posted July 30, 2012 Report Share Posted July 30, 2012 Hello friends, Sometime is difficult to configure the system. 32 bits, with all the application and specially the drivers working perfect ? But the accessed memory limited at 2.97 giga ? Or 64, with problems with the drivers ? And of course, all the memory accessed ? For example, I was extremely disappointed with a plotter driver not working on W7 64...They announce officially that no deriver in the future on the manufacture site. and others..... I find a solution: Upload at http://www.sendspace.com/file/qg1n8h It is a small windows patch, allow on the 32 systems to acces all the memory ! Tested and work Regards 3 Quote Link to comment Share on other sites More sharing options...
3dbu Posted July 30, 2012 Report Share Posted July 30, 2012 nice man thks Quote Link to comment Share on other sites More sharing options...
juliusmall Posted July 31, 2012 Author Report Share Posted July 31, 2012 Forget to mention, thanks to the people of LavTeam Quote Link to comment Share on other sites More sharing options...
Lurker Posted July 31, 2012 Report Share Posted July 31, 2012 this is nothing to do with GIS, MOVED to off topic 1 Quote Link to comment Share on other sites More sharing options...
arcsump Posted August 3, 2012 Report Share Posted August 3, 2012 I thought this was a question? Bur in that case lemme comment on the 64 bit using a 32 bit program. If you opt to use a 32 bit program on a 64 bit os, chances are you get POORER performance than when you run it on a 32 bit OS. This is because the 64 bit system uses an abstraction layer to mimic the 32 bit system ,much like a virtual drive. 'S So, unless you all use 64 bit programs , stick to the 32 bit OS, Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.