Jump to content
  • Chatbox

    You don't have permission to chat.
    Load More

    overlapping of 2 or more maps in arcgis

    adnan0001
    By adnan0001,
    hi friends.... can any1 tell how to overlap or join the maps i have made relief or hillshade maps at different angles The first shaded relief image created had a solar azimuth (sun angle) of 0°, and a solar elevation of 30°. An ambient light setting of 0.20 was used..the other 7 are 45°, 90°,135°, 180°, 225°, 270° ,and 315°...and i want to combine four shaded relief image to produce one shaded relief image for 0 to 135 as 1 and remaining 1 and from these 2 maps =1map can any1 tel me the proce

    Landsat 8 Data Product

    shaimaa gamal
    By shaimaa gamal,
    lDCM image acquired March 18, 2013 in Bands 6,5,4, sharpened with panchromatic band LDCM/Landsat 8 First Image Data Product - tar.gz (899 MB) NOTE: This sample image is considered Engineering data, which implies that the data do not meet the exact specification as when the Landsat Data Continuity Mission (LDCM) is declared operational in May. These data should be used with intention and caution with the following caveats in mind: Because LDCM is not on its correct orbit path, there may be geo

    Add Tool to ToolBox ArcGIS 10.1 Engine

    KingR1
    By KingR1,
    How add tool to toolbox using arcrngine in C#? All times that i tried to do this, i add tool only once. I create class library project, add some code as BaseTool, build, it's generate dll file. Then i try to add this dll using desing properties of ToolBox, but get error "An error occured when try to add command". In that one success time, when i add tool, project also generate tlb file. How it generate i can't understand. Maybe in this is problem? Thanks for any advices. Roman.

    Conference 3D at SPAR International 2013

    shaimaa gamal
    By shaimaa gamal,
    Innovate, connect, learn at the 10th SPAR International! Join 3D innovators from around the world for 4 days of 3D immersion at SPAR International 2013. Learn how to use 3D technologies to work better, faster, smarter, safer and cheaper; connect with thought-leaders and other users; and discover the newest technological advances from leading hardware manufacturers and software suppliers. 15-18 april2013 Check out the final Conference Schedule and list of 100 expert prese

    Definition Query's

    guyrand
    By guyrand,
    Working with ArcMap 10, and struggling learning about query's. I understand very little, only what I've picked up on the help tab in query builder. So much more to it, can anyone share any lists of commands with a little explanation? I found some free training lessons on the ESRI website. I am really just getting my feet wet, so some coursework in the basics is what I need. Help is greatly appreciated!!!

Portal by DevFuse · Based on IP.Board Portal by IPS
  • Forum Statistics

    8.7k
    Total Topics
    43.4k
    Total Posts
  • Latest Posts

    • Hello! Hello!   Join us on Wednesday [GIS DAA] for a zoom webinar as we discuss "The Future of GIS: Emerging Technologies and Global Impact in Different Sectors" and "GIS for Sustainable Development."   Our event will feature two distinguished key speakers, senior specialists in the field, who will enlighten us with their insights and expertise.   Save the date and stay tuned for more details on this exciting opportunity to explore the cutting-edge advancements and societal applications of Geographic Information Systems. Here is the registration link: https://shorturl.at/f5W68   See you there! #IRESexperience
    • Sometimes you need to create a satellite navigation tracking device that communicates via a low-power mesh network. [Powerfeatherdev] was in just that situation, and they whipped up a particularly compact solution to do the job. As you might have guessed based on the name of its creator, this build is based around the ESP32-S3 PowerFeather board. The PowerFeather has the benefit of robust power management features, which makes it perfect for a power-sipping project that’s intended to run for a long time. It can even run on solar power and manage battery levels if so desired. The GPS and LoRa gear is all mounted on a secondary “wing” PCB that slots directly on to the PowerFeather like a Arduino shield or Raspberry Pi HAT. The whole assembly is barely larger than a AA battery. It’s basically a super-small GPS tracker that transmits over LoRa, while being optimized for maximum run time on limited power from a small lithium-ion cell. If you’re needing to do some long-duration, low-power tracking task for a project, this might be right up your alley. https://hackaday.com/2024/10/17/tiny-lora-gps-node-relies-on-esp32/
    • Multiple motors or servos are the norm for drones to achieve controllable flight, but a team from MARS LAB HKU was able to a 360° lidar scanning drone with full control on just a single motor and no additional actuators. Video after the break. The key to controllable flight is the swashplateless propeller design that we’ve seen a few times, but it always required a second propeller to counteract self-rotation. In this case, the team was able to make that self-rotation work so that they could achieve 360° scanning with a single fixed LIDAR sensor. Self-rotation still needs to be slowed, so this was done with four stationary vanes. The single rotor also means better efficiency compared to a multi-rotor with similar propeller disk area. The LIDAR comprises a full 50% of the drone’s weight and provides a conical FOV out to a range of 450m. All processing happens onboard the drone, with point cloud data being processed by a LIDAR-inertial odometry framework. This allows the drone to track and plan its flight path while also building a 3D map of an unknown environment. This means it would be extremely useful for indoor or underground environments where GPS or other positioning systems are not available. All the design files and code for the drone are up on GitHub, and most of the electronic components are off-the-shelf. This means you can build your own, and the expensive lidar sensor is not required to get it flying. This seems like a great platform for further experimentation, and getting usable video from a normal camera would be an interesting challenge.   Single Rotor Drone Spins For 360 Lidar Scanning | Hackaday
    • The fall update to Global Mapper includes numerous usability updates, processing improvements, and with Pro, beta access to the Global Mapper Insight and Learning Engine which contains deep learning-based image analysis tools. Global Mapper is a complete geospatial software solution. The Standard version excels at basic vector, raster, and terrain editing, with Global Mapper Pro expanding the toolset to support drone-collected image processing, point cloud classification and extraction, and many more advanced image and terrain analysis options. Version 26.0 of Global Mapper Standard focuses on ease-of-use updates to improve the experience and efficiency of the software. A Global Search acts as a toolbox to locate any tool within the program, and a source search in the online data streaming tool makes it easier to bring online data into the application. Updates for working with 3D data include construction site planning to keep all edited terrain for a flattened site within a selected area and the ability to finely adjust the vertex position of 3D lines in reference to terrain in the Path Profile tool. Perhaps the largest addition to Global Mapper Pro v26.0 is the availability of the new Insight and Learning Engine which provides deep learning-based image analysis. Available with Global Mapper Pro for a limited time for users to test and explore, users can leverage built-in models for building extraction, vehicle detection, or land cover classification. These models can even be fine-tuned with iterative training to optimize the analysis for the data area.
  • Latest Topics

  • Recent Achievements

    • Robyev earned a badge
      One Month Later
    • Robfib earned a badge
      One Month Later
    • msig0000 went up a rank
      Rookie
    • instrutorgis earned a badge
      One Year In
    • umn earned a badge
      Reacting Well
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

Disable-Adblock.png

 

If you enjoy our contents, support us by Disable ads Blocker or add GIS-area to your ads blocker whitelist