Jump to content
  • Chatbox

    You don't have permission to chat.
    Load More

    eCognition problem when using ASAR (as geotiff) combined with vector (.shp)

    chrivas
    By chrivas,
    Good day everyone, I face a problem when i try to segment an image by using a vector file (.shp). I get "rasterizing vector layer" message wich gives me an estimated time of process completion around 1500-3000 minutes.   More specificaly, I create a project and i import: 1) a geotiff image (converted ASAR) 2) a coeastline shapefile (gshhg)   After the project creation i get into ruleset development and i try to segment the image by using chessboard type segmentation (5x5) with thematic la

    is there method to crete 16 days data LST MODIS ?

    elwali
    By elwali,
    i'm asking about the possbility of having an image of 16days LST MODIS from two image of 8days LST MODIS because i'm going to combinate that 16 days LST MODIS with another paramater like NDVI 16days MODIS so i need the same temporal granituly

    3D Point Densify

    ahyakbaba
    By ahyakbaba,
    Hi Folks,   I am working on a 3d model and i have good question. I have cross-section point which is data captured from field on the river side.   Cross-section points were collected each at a distance at 1 kilometers.(Surveying scale:1K   At the same time i have another DEM (Scale:25K). All 25K DEM covering project area.   Now, I want to create and densify field cross section points for in 100 meters itaking advantage of this DEM file in in 600 meter wide corridor. Is it possible? How c

    ArcObjects Help for .NET developers offline mode

    am2
    By am2,
    Hi every one.. Does Any one know any offline source of this site: http://help.arcgis.com/en/sdk/10.0/arcobjects_net/ao_home.html I tried to download it using IDM Grabber but it tries to download hole website..I just want to limit to API refrences and Concepts & Sample .. Thanks a lot  

    Agriculture Cadastar Geodatabase

    am2
    By am2,
    Hi every one, Does Any one has worked in creation of a cadastar for agriculture fiels?I want to know what information would be nessesery to gather from farmers?I have prepeared some personal informations..then about their field and GPS information What do you think is useful to get from them?do you know any good source for it? thanks a lot

Portal by DevFuse · Based on IP.Board Portal by IPS
  • Forum Statistics

    8.7k
    Total Topics
    43.4k
    Total Posts
  • Latest Posts

    • Hello! Hello!   Join us on Wednesday [GIS DAA] for a zoom webinar as we discuss "The Future of GIS: Emerging Technologies and Global Impact in Different Sectors" and "GIS for Sustainable Development."   Our event will feature two distinguished key speakers, senior specialists in the field, who will enlighten us with their insights and expertise.   Save the date and stay tuned for more details on this exciting opportunity to explore the cutting-edge advancements and societal applications of Geographic Information Systems. Here is the registration link: https://shorturl.at/f5W68   See you there! #IRESexperience
    • Sometimes you need to create a satellite navigation tracking device that communicates via a low-power mesh network. [Powerfeatherdev] was in just that situation, and they whipped up a particularly compact solution to do the job. As you might have guessed based on the name of its creator, this build is based around the ESP32-S3 PowerFeather board. The PowerFeather has the benefit of robust power management features, which makes it perfect for a power-sipping project that’s intended to run for a long time. It can even run on solar power and manage battery levels if so desired. The GPS and LoRa gear is all mounted on a secondary “wing” PCB that slots directly on to the PowerFeather like a Arduino shield or Raspberry Pi HAT. The whole assembly is barely larger than a AA battery. It’s basically a super-small GPS tracker that transmits over LoRa, while being optimized for maximum run time on limited power from a small lithium-ion cell. If you’re needing to do some long-duration, low-power tracking task for a project, this might be right up your alley. https://hackaday.com/2024/10/17/tiny-lora-gps-node-relies-on-esp32/
    • Multiple motors or servos are the norm for drones to achieve controllable flight, but a team from MARS LAB HKU was able to a 360° lidar scanning drone with full control on just a single motor and no additional actuators. Video after the break. The key to controllable flight is the swashplateless propeller design that we’ve seen a few times, but it always required a second propeller to counteract self-rotation. In this case, the team was able to make that self-rotation work so that they could achieve 360° scanning with a single fixed LIDAR sensor. Self-rotation still needs to be slowed, so this was done with four stationary vanes. The single rotor also means better efficiency compared to a multi-rotor with similar propeller disk area. The LIDAR comprises a full 50% of the drone’s weight and provides a conical FOV out to a range of 450m. All processing happens onboard the drone, with point cloud data being processed by a LIDAR-inertial odometry framework. This allows the drone to track and plan its flight path while also building a 3D map of an unknown environment. This means it would be extremely useful for indoor or underground environments where GPS or other positioning systems are not available. All the design files and code for the drone are up on GitHub, and most of the electronic components are off-the-shelf. This means you can build your own, and the expensive lidar sensor is not required to get it flying. This seems like a great platform for further experimentation, and getting usable video from a normal camera would be an interesting challenge.   Single Rotor Drone Spins For 360 Lidar Scanning | Hackaday
    • The fall update to Global Mapper includes numerous usability updates, processing improvements, and with Pro, beta access to the Global Mapper Insight and Learning Engine which contains deep learning-based image analysis tools. Global Mapper is a complete geospatial software solution. The Standard version excels at basic vector, raster, and terrain editing, with Global Mapper Pro expanding the toolset to support drone-collected image processing, point cloud classification and extraction, and many more advanced image and terrain analysis options. Version 26.0 of Global Mapper Standard focuses on ease-of-use updates to improve the experience and efficiency of the software. A Global Search acts as a toolbox to locate any tool within the program, and a source search in the online data streaming tool makes it easier to bring online data into the application. Updates for working with 3D data include construction site planning to keep all edited terrain for a flattened site within a selected area and the ability to finely adjust the vertex position of 3D lines in reference to terrain in the Path Profile tool. Perhaps the largest addition to Global Mapper Pro v26.0 is the availability of the new Insight and Learning Engine which provides deep learning-based image analysis. Available with Global Mapper Pro for a limited time for users to test and explore, users can leverage built-in models for building extraction, vehicle detection, or land cover classification. These models can even be fine-tuned with iterative training to optimize the analysis for the data area.
  • Latest Topics

  • Recent Achievements

    • Robyev earned a badge
      One Month Later
    • Robfib earned a badge
      One Month Later
    • msig0000 went up a rank
      Rookie
    • instrutorgis earned a badge
      One Year In
    • umn earned a badge
      Reacting Well
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

Disable-Adblock.png

 

If you enjoy our contents, support us by Disable ads Blocker or add GIS-area to your ads blocker whitelist